Categories

Site Information

 Loading... Please wait...
  • Veratron GO GPS Receiver [B00034901]

Veratron GO GPS Receiver [B00034901]

$163.99 $147.59
(You save $16.40)
SKU:
B00034901-VER
Quantity:

Product Description

GO GPS Receiver

All your boat’s data close to your finger tips. Veratron GO is NMEA 2000® certified and features an integrated GPS/GLONASS/GALILEO receiver. Compact and easy to install, it does not require any additional protection against harsh weather conditions.  One of the smallest GPS receivers available.

The Veratron GO GPS Receiver works in conjunction with the Veratron Go Data.

Features:

  • 72 channel receiver
  • Fast cold-start position fix
  • Compatible with OceanLink 52MM Bezels 
  • 10Hz update rate
  • Up to 3 concurrent GNSS systems (GPS, GLONASS and GALILEO)
  • SBAS – WAAS/EGNOS/MSAS/GAGAN supported
  • NMEA 2000 standard PGNs transmitted for position, time, speed and heading
  • Front-end SAW band-pass filter for enhanced immunity against electrical noise
  • Interchangeable bezel option

Technical Specifications:

  • Update Rate: Up to 10Hz  using concurrent GNSS, up to 18Hz using single GNSS
  • Position Fix Time: 26 second  cold-start, 1 second hot start
  • Tracking Sensitivity:  -165dBm
  • Position Accuracy: 2.5m
  • Velocity Accuracy: 0.05m/s
  • Heading Accuracy: 0.3°
  • Water Resistance: IPX7
  • Dimensions (D x H): 60.7 mm x 18.9 mm
  • Power Source: NMEA 2000 backbone (12V nominal voltage), no external power supply required
  • Power Consumption: 100mA (2 LEN) operational, 150mA (3 LEN) during startup

In the Box:

  • GO GPS Receiver
  • Instructions Manual 

*Sold as an Individual 

Specifications:

  • Color: White
  • Diameter (mm): 60.7
  • Box Dimensions: 3"H x 3"W x 4"L WT: 0.5 lbs
  • UPC: 7640178729414

Brochure (pdf)

Product Videos

Veratron LinkUp gateways 01:17

UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000® The veratron LinkUp gateways bring your analogue sensors to the NMEA 2000® network era. All your boat’s data are now digitally available to be displayed on any NMEA 2000® enabled device. Available in 5 variants to serve different scenario: - Generic resistive (level sensors, temperature sensors, pressure sensors, …) - Pyrometer - Intelligent Battery Sensor (IBS) - Combined Temp/Press sensor - J1939 All NMEA 2000® certified! PLUG-AND-PLAY INSTALLATION The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000® network without the need of additional adapters. No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000® network! The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time. WIRELESS CONFIGURATION The configuration of the LinkUp devices has never been so easy. Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration. Thanks to the embedded passive antenna the configuration can be done powerless! Discover more on www.veratron.comThe LinkUp Configurator is your veratron companion App to wirelessly configure your LinkUp gateway device in a snap. Discover more on https://www.veratron.com For additional information contact us at info@veratron.com

  • Veratron LinkU...
    UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000® The veratron LinkU...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the Veratron GO GPS Receiver [B00034901] to your wish list.