Categories

Site Information

 Loading... Please wait...
  • Victron Blue Smart IP22 12VDC 15A 1 Bank 120V Charger - Dry Mount [BPC121545102]

Victron Blue Smart IP22 12VDC 15A 1 Bank 120V Charger - Dry Mount [BPC121545102]

$154.00 $130.90
(You save $23.10)
SKU:
BPC121545102-VIC
Quantity:

Product Description

Blue Smart IP22 12VDC 15A 1 Bank 120V Charger - Dry Mount

The Blue Smart IP22 Charger is the professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Bluetooth Smart

The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage

The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple bulk – absorption – float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating

Output current will reduce as the temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication

Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.

Please contact your dealer for any returns, repairs or support issues related to this product.


Quick Guide (pdf)
Owner's Manual (pdf)

Product Videos

Did you know - Use a Blue Smart Charger as a Power Supply 00:57

In this Did you know, Jono explains how to use a Blue Smart charger as a power supply and it's voltage ranges. #victron #victronenergy #charger For technical questions see our support page: https://www.victronenergy.com/support or contact your Victron dealer, distributor or installer. You can also have a look at our Victron Community page to see if your question has already been answered there. Or join in the conversation to help others: https://community.victronenergy.com

  • Did you know -...
    In this Did you know, Jono explains how to use a Blue Smart ch...
  • History and se...
    For technical questions see our support page: https://www.vict...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the Victron Blue Smart IP22 12VDC 15A 1 Bank 120V Charger - Dry Mount [BPC121545102] to your wish list.